P4
9. Blades installation
9. Blades installation
Attach blade to blade holder with
blade screw & rubber washer provided.
Make sure that all screws are firmly tightened.
Mount blade assembly to motor
housing by motor screws provided.
NOTE: Do not bend blade holder to prevent wobble.
10. Blades assembly to motor
10. Blades assembly to motor
Motor Screw
Blade Assembly
12. Turn the power on - your fan is ready for operation.
12. Turn the power on - your fan is ready for operation.
Insert wires existing from Light Kit Fitter by passing through center hole and
attach Light Kit Fitter to Switch Housing Cover with threaded tube and /or
fasten with spring washer and hex nut.
11. Make wire connections for light kit if applicable
11. Make wire connections for light kit if applicable
Screw
Blade
Paper Washer
( 1 ). Blue wire from Light Kit to blue wire
from fan and connect by wire nut.
( 2 ). Orange wire from Light Kit to orange wire
from fan and connect by wire nut.
Switch Housing
Screw
Wire Nut
Switch Housing
Cover
Orange Wire
Light Kit Fitter
Orange Wire
Blue Wire
Blue Wire
Attach switch housing cover and light kit assembly to switch housing by 3 original screws.
