P3
Lift fan assembly onto
mounting bracket.
Carefully lift fan assembly onto mounting bracket.
Rotate fan so that the groove on the ball engages
the ridge in the mounting bracket.
Ridge
Ball Groove
Mounting
Bracket
Mounting
Bracket
6. Hanging the fan
6. Hanging the fan
4.Make Wire Connection
4.Make Wire Connection
7. Making wire connection
7. Making wire connection
Follow diagram below and make sure that all exposed wires are secured inside wire nuts.
Note : Wires from house may vary in color and may not include ground wire ( green ).
After wiring is completed, gently push wires into junction box with nuts pointing upward.
Secure with twist - lock wire nuts (Included).
From House
From Fan
( from downrod )
( from mounting bracket )
( for ground wire )
( for light kit )
(AC-N)
(AC-L)
(motor-N)
(motor-L)
1.Push up the Canopy until the two screws on mounting bracket
are engaged with Key Holes in canopy.
2.Rotate the canopy slightly until the two screw heads are in the
small end of the Key Holes.
3.Tighten both screws.
8. Install the canopy
8. Install the canopy
Key Holes
Canopy
Screw
Yellow
Green
Orange
Brown
Blue
Yellow
Green
Yellow
Green
Brown
Blue
