GB - 5
You can use the provided clips. These clips allow you to connect an extra wire,
without cutting through the original car radio wire.
-
Connect the – wire to the black wire that goes to your car radio.
-
Guide the wire with the button and the 2.5 mm / 3.5 mm Jack plug to the place
where your audio device is located.
-
Select your charging wire, for mini USB or iPod, and connect this to the Stereo-
BOOMM
®
. Guide this wire also to the place where your audio device is located.
-
Place your StereoBOOMM
®
in the hole behind your car radio and place your
car radio back into its place.
Charging cables
m_StereoBoomm_GB.indd 5
m_StereoBoomm_GB.indd 5
07.12.2007 19:12:45
07.12.2007 19:12:45