Helpful Hints
Fresh tap water should be used in the machine at all times.
DO NOT USE HOT WATER.
Use only genuine MR. COFFEE
TM
8-12 cup basket filters for
best brewing performance.
Avoid using chemically softened water whenever possible.
The use of chemically softened water can inhibit proper
filtration. This will affect the beverage flavor and will cause a
long drip time from the steeping basket.
To assist us in serving you, please have the model
number Series TM1 and date of purchase available.
All repairs must be made by an Authorized
Sunbeam Service Center.
Please call us for the authorized service center in your area.
Please Do Not Return This Appliance To Your Store.
We welcome your questions, comments or suggestions.
In all your communications, please include your complete name,
address and telephone number and description of problem.
If Service Is Required, Do Not Return To Your Store
For Service, call 1-800-672-6333
7. Remove steeping basket and discard contents of pitcher.
Rinse pitcher, steeping basket and lid thoroughly with water.
8. Repeat Steps 1 through 7 with clean water only (no
cleaning solution) to rinse out the machine.
9. Be sure to thoroughly rinse the unit until you see no trace of
the blue solution. When completed, wash pitcher, steeping
basket and lid with mild detergent and rinse thoroughly.
10. If a normal brewing flow rate is not achieved, repeat the
cleaning procedure.
Using Vinegar:
1. Pour 1 quart of undiluted white household vinegar into
the water reservoir.
2. Place one tray of ice cubes in pitcher.
3. Place the steeping basket with lid into the pitcher and
slide it under the machine. The pitcher must be placed
snug against the machine before operation.
4. Push the ON button to begin the brewing cycle. After
approximately 1 cup of vinegar has pumped into the pitcher,
unplug the appliance and allow it to sit for 30 minutes.
5. Plug the cord back in and turn the machine ON to pump
out the remaining vinegar.
6. When the machine shuts off, remove the pitcher and
discard the vinegar.
7. Fill the pitcher with clear tap water to the water level marked
on the pitcher and repeat Steps 1 through 4 (no vinegar).
Turn the machine ON to rinse out all traces of vinegar.
8. Repeat rinsing procedure.
Pitcher Cleaning
Hard water can leave whitish mineral deposits inside the
pitcher. Tea and coffee discolor these deposits. To remove,
fill the pitcher with hot white vinegar and let soak for about
20 minutes. Do not use harsh abrasive cleaners. They will
cause scratches which can lead to breakage.
12
13
TM1_15EM1.indd 12-13
3/25/15 11:54 AM
