SP1G CONCRETE SAW • OPERATION MANUAL — REV. #3 (09/07/17) — PAGE 25
OPERATION
1. Ensure that the engine shutdown switch (Figure 16)
and the engine ON/OFF switch (Figure 17) on the
engine are both in the OFF position to avoid accidental
starting.
CAUTION
DO NOT
attempt to operate the saw until
this manual has been read and thoroughly
understood. Engine operating steps may
vary. See engine manufacturer's operating
manual.
WARNING
When the engine is running the
cutting blade is
ALWAYS
rotating.
Keep hands and feet clear of rotating
blade. Raise the saw to full height
when maneuvering the saw within
the cutting area.
All displacement of the machine
outside the cutting area must be
carried out with the tool not in rotation.
WARNING
NEVER
place hands or feet inside the
belt guard or blade guard while the
engine is running.
ALWAYS
shut the
engine down before performing any
kind of maintenance on the saw.
CAUTION
Ensure the work area is clear of tools, debris, and
unauthorized people.
NOTICE
The saw is equipped with an outlet that provides a
connection to a dust collection bag or vacuum system.
It is recommended that a dust collection bag or vacuum
system is used while the saw is in operation.
NOTICE
The Engine Stop Switch serves both as an Emergency
Engine Shut-Off and as the primary shutdown switch.
This allows the operator to shutdown the saw safely
away from moving parts.
Figure 16. Engine Shutdown Switch
Figure 17. Engine ON/OFF Switch
2. Place the fuel valve lever (Figure 18) to the ON position.
Figure 18. Fuel Valve Lever (ON)
3. Place the engine shutdown switch and the engine
ON/OFF switch on the engine to the ON position.
ON
OFF
ENGINE SWITCH
FUEL VALVE
LEVER
ON
OFF
