MQ Multiquip WHITEMAN CA4HC Скачать руководство пользователя страница 9

Страница: 9 / 46

PAGE 8 — CA4HC WALK-BEHIND TROWEL • OPERATION MANUAL — REV. #1 (06/24/20)

SAFETY INFORMATION

SAFETY DECALS

Decals associated with the safe operation of this equipment

are defi ned below:

DANGER

Belt Guard Hazard

DO NOT

remove belt guards.

Keep hands and fingers clear from engine belts.

Moving parts can crush.

DANGER

Training

This machine to be operated by qualified

personnel only. Ask for training as needed.

DANGER

Rotating Blade Hazard

Keep hands, fingers, and feet clear of engine

fan blades and guard rings. Moving parts can cut.

DO NOT

remove guards.

Stop engine before servicing.

P/N 23700

WARNING

Lifting/Crush Hazard

NEVER

allow any person to stand

underneath the trowel while lifting.

DO NOT

lift trowel with pans attached.

ALWAYS

make sure handle is securely attached.

P/N 36099

NOTICE

Read Manual

To avoid injury, you must read and understand

the operator’s manual before using this machine.

NOTICE

Protective Clothing

ALWAYS

wear appropriate clothing

when operating the trowel.

NOISE LEVEL

Indicates value of the sound power of the

equipment measured at operator’s seat.

WARNING

CANCER &

REPRODUCTIVE HARM

www.P65Warnings.ca.gov

P/N 38707

WARNING

Cancer and Reproductive Harm

This equipment may contain or produce

chemicals and substances known to cause

cancer, birth defects and other reproductive harm.

ALWAYS

work in a well-ventilated area and

ALWAYS

wear approved safety equipment.

GENERAL SAFETY

CAUTION

DO NOT

operate this equipment without proper protective

clothing, shatterproof glasses, respiratory protection,

hearing protection, steel-toed boots and other protective

devices required by the job or city and state regulations.

Avoid wearing jewelry or loose-fi tting clothes that may

snag on the controls or moving parts as this can cause

serious injury.

DO NOT

operate this equipment when not

feeling well due to fatigue, illness, or when

on medication.

DO NOT

operate this equipment under the

infl uence of drugs or alcohol.

ALWAYS

clear the work area of any debris, tools, etc.

that would constitute a hazard while the equipment is

in operation.

NO ONE

other than the operator is to be in the working

area while the equipment is in operation.

NEVER

use the equipment for any purpose other than

its intended purposes or applications.

order

Discount-Equipment.com

Содержание WHITEMAN CA4HC















































Результаты поиска

Содержание WHITEMAN CA4HC

Отзывы:

Похожие инструкции для WHITEMAN CA4HC

Бренды по названию

Популярные бренды

MQ Multiquip WHITEMAN CA4HC, Руководство по эксплуатации

Результаты поиска

Содержание WHITEMAN CA4HC

Отзывы:

Похожие инструкции для WHITEMAN CA4HC

Бренды по названию

Популярные бренды