MQ Multiquip WHITEMAN CA4HC Скачать руководство пользователя страница 20

Страница: 20 / 46

CA4HC WALK-BEHIND TROWEL • OPERATION MANUAL — REV. #1 (06/24/20) — PAGE 19

Figure 3 shows the location of the basic trowel components.

A brief description of each component is listed below.
1.

Standard Handle

— Equipped with a star wheel for

manually adjusting blade pitch.

Quick Pitch™ Handle (Optional)

—

To adjust the pitch

of the blades upward using the Quick Pitch™ handle,

simply pull the T-handle backward while squeezing the

trigger. Push the T-handle forward to pitch the blades flat
(no pitch). Handle folds for storage.

Contact Multiquip

unit sales to purchase this option.

Throttle Lever (Quick Pitch™ Handle)

— Equipped

with an integrated ‘kill’ switch.

Centrifugal Safety Stop Switch

— Will stop the

engine and bring the trowel to a halt in the event of a

trowel runaway condition (i.e. the operator releases the

handlebar during operation).

Throttle Lever (Standard Handle)

— Controls engine

speed.

Hand Grip/Handlebar

— Place hands on both hand

grips to maneuver the trowel. Replace hand grips when

they become worn or damaged.

Engine

— Honda 3.5 hp (2.6 kW) gasoline engine.

Refer to Table 2 for engine specifications.

Pitch Control Star Wheel (Standard Handle)

— Adjusts

blade pitch. Rotate the star wheel clockwise to pitch the

blades upward. Rotate the star wheel counterclockwise

to pitch the blades flat (no pitch).

Quick Pitch™ Trigger

— Pivots back and forth to

adjust blade pitch.

10.

Guard Ring

— Protects the rotating blades from

damage and protects the operator from injury.

DO NOT

put hands or feet inside the guard ring while the engine

is running.

NEVER

attempt to lift the trowel by the

guard ring.

11.

Trowel Arms (4)

— Blades or float pans are attached

to the trowel arms.

DO NOT

operate the trowel with a

bent, broken, or out-of-adjustment trowel arm.

12.

Blades (4)

— This trowel is equipped with special

combination blades designed specifically for edging.

13.

V-Belt Cover

— Remove this cover to gain access to

the V-belt.

DO NOT

operate the trowel with this cover

removed.

14.

Lifting Bail

— Attach a suitable lifting device to the

lifting bail whenever lifting of the trowel is required.

15.

Thumbwheel Adjuster

— Use to adjust the throttle

cable.

16.

T-Handle Knob (Quick Pitch™ Handle)

— Loosen

the T-handle knob to fold the Quick Pitch™ handle.

17.

Quick Pitch™ Trigger Lock

— Use to lock blade

pitch position.

18.

‘Kill’ Switch

— Integrated into the Quick Pitch™

handle.

19.

Throttle Lever Idle Detent

— When pressed, the

detent will hold the throttle lever away from the ‘kill’

switch, allowing the engine to run at idle.

20.

Quick Pitch™ Latching Bolt

— Provides secure

positioning of the Quick Pitch™ handle into a slotted

pitch comb.

COMPONENTS (TROWEL)

order

Discount-Equipment.com

Содержание WHITEMAN CA4HC















































Результаты поиска

Содержание WHITEMAN CA4HC

Отзывы:

Похожие инструкции для WHITEMAN CA4HC

Бренды по названию

Популярные бренды

MQ Multiquip WHITEMAN CA4HC, Руководство по эксплуатации

Результаты поиска

Содержание WHITEMAN CA4HC

Отзывы:

Похожие инструкции для WHITEMAN CA4HC

Бренды по названию

Популярные бренды