PAGE 26 — MVH128GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #0 (03/08/18)
MAINTENANCE
3. Clean foam element in warm, soapy water or
nonflammable solvent. Rinse and dry thoroughly. Dip
the element in clean engine oil and completely squeeze
out the excess oil from the element before installing.
4. Blow compressed air (Figure 26) through the air
cleaner cover as shown in (Figure 25). Clean inside of
air filter cover with warm, soapy water or nonflammable
solvent. Rinse and dry thoroughly.
Figure 26. Engine Air Filter Cover
ENGINE OIL
1. Remove the oil drain bolt (Figure 27). and sealing
washer and allow the oil to drain into a suitable
container.
2. Replace engine oil with recommended type oil as listed
in Table 5. For engine oil capacity, see Table 2 (Engine
Specifications).
DO NOT overfill.
3. Reinstall drain bolt with sealing washer and tighten
securely.
BLOW COMPRESSED AIR
NOTICE
Operating the engine with loose or damaged air cleaner
components could allow unfiltered air into the engine
causing premature wear and failure.
NOTICE
Drain the engine oil when the oil is warm.
Figure 27. Draining Engine Oil
HYDRAULIC OIL
1. With the handle in vertical position, remove the plug
cap from the hydraulic pump (Figure 28).
Figure 28. Removing Plug/Breather Cap
2. Remove the breather plug with a 24 mm wrench at the
top of the hydraulic pump.
3. Remove the hydraulic hose connected to the cylinder
on the vibrator side (Figure 29).
Figure 29. Removing Hydraulic Hose
DRAIN BOLT
SEALING WASHER
OIL LEVEL
OIL LEVEL
BREATHER
PLUG
PLUG CAP
HAND PUMP
AIR RELEASING PLUG
CYLINDER
HYDRAULIC HOSE
Содержание MVH128GH
Страница 2: ...PAGE 2 MVH128GH PLATE COMPACTOR OPERATION AND PARTS MANUAL REV 0 03 08 18 PROPOSITION 65 WARNING ...
Страница 3: ...MVH128GH PLATE COMPACTOR OPERATION AND PARTS MANUAL REV 0 03 08 18 PAGE 3 NOTES ...
Страница 83: ...MVH128GH PLATE COMPACTOR OPERATION AND PARTS MANUAL REV 0 03 08 18 PAGE 83 NOTES ...