MQ Multiquip MVH128GH Скачать руководство пользователя страница 21

Страница: 21 / 84

MVH128GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #0 (03/08/18) — PAGE 21

OPERATION

1. Once the engine has started, move the engine throttle

lever quickly to the

operation

position (Figure 20).

Figure 20. Throttle Lever (Operation Position)

2. The direction control lever allows the machine to be

moved either backward or forward (Figure 21). The

direction control lever is normally in the forward position

and the machine automatically moves forward. When

pulled backward, the machine moves backward.

Figure 21. Direction Control Lever

CAUTION

ALWAYS follow all safety rules in the safety

section of this manual before operating

compactor. Keep work area clear of debris

and other objects that could cause bodily

injury or damage to the compactor.

OPERATION

POSITION

IDLE

POSITION

THROTTLE

LEVER

NOTICE

ALWAYS move the throttle lever quickly, without

hesitation, because increasing the engine speed slowly

causes the clutch to slip.

DIRECTION

CONTROL LEVER

REVERSE

NEUTRAL

FORWARD

3. When the direction control lever is the neutral position,

the machine vibrates staying at the same location

4. Compactor traveling speed may drop on soils which

contain clay, however there may be cases where

traveling speed drops because the compaction plate

does not leave the ground surface easily due to the

composition of the soil. To rectify this problem do the

following:
a. Check the bottom plate to see if clay or equivalent

material has been lodged in the plate mechanism.

If so, wash with water and remove.

b. Remember the compactor does not work as

efficiently on clay or soils that have a high moisture

content level.

c. If the soil has a high moisture level, dry soil to

appropriate moisture content level or carry out

compaction twice.

STOPPING THE ENGINE

Normal Shutdown

1. Move the throttle lever to the

idle

position (Figure 22)

and run the engine for three minutes at low speed.

Figure 22. Throttle Lever (Idle)

NOTICE

NEVER stop the engine suddenly while working at

high speeds.

OPERATION

POSITION

IDLE

POSITION

THROTTLE

LEVER

Содержание MVH128GH





















































































Результаты поиска

Содержание MVH128GH

Отзывы:

Похожие инструкции для MVH128GH

Бренды по названию

Популярные бренды

MQ Multiquip MVH128GH, Руководство по эксплуатации и запасным частям

Результаты поиска

Содержание MVH128GH

Отзывы:

Похожие инструкции для MVH128GH

Бренды по названию

Популярные бренды