LETHE EN
21
INSTALLATION OF CEILING MODULE
Unpack the device. Check whether any of the components are damaged.
To remove the ceiling module, press the ceiling module inside the unit and rotate it
until the lamp shade snaps into the cut-outs in the ceiling module slot. Remove the
ceiling module from the slot. Fasten the ceiling module to the desired location on the
ceiling using dowels and screws using the mounting holes in the rack of the ceiling
module.
Connect the electrical cables to the module as shown in the following figure.
MOUNTING THE LAMPSHADE
To mount the lamp shade on the ceiling module, turn it with the socket upside down
so that the green latches of the module are based on the green positioning stickers.
Gently press the lamp shade onto the module until it clicks into place. Make sure that
the whole unit is stable and does not fall off.
REMOVING THE LAMPSHADE
To remove the lampshade from the ceiling module, gently press the lampshade onto
the module and turn it clockwise or counterclockwise until it can be removed. The
lampshade must be rotated 90 degrees from the working position to the maximum
when the lampshade hangs securely on the ceiling module.
Phase cable
L
Neutral cable
N
Protective cable
PE
