EN
© 2020 HUSLOG
All rights reserved
14
During the operation of the UV lamp, people should stay away from
the device to avoid injuries to eyes and skin. This also applies to
animals.
The use of a narrow band UV-C radiation by the device
produces an additional effect of low-concentration
ozone, which can aid the sterilization process.
The effect is
applicable in small, closed and confined spaces (furniture interiors,
refrigerator interiors, washing machines, etc.).
Charging the battery
Charge the battery to the full before the first use. Several charging
and discharging cycles may be necessary to achieve full battery
capacity.
The battery can be charged using a USB charger, power bank or from the
USB port of your computer (devices are not a part of offer, not included).
To start the charging process, connect the USB cable (included) to the
micro USB connector on the back of the unit. Plug the second end of USB
rack to the power supply. The start of charging will be indicated by the
red power button lighting up. Disconnect the USB cable from the device
when the button light turns green.
The device can work while charging.
Avoid excessive battery discharge. This can damage the battery or
shorten its service life.
6. Troubleshooting
If you have problems with the unit, please refer to the following tips.
The device does not
switch on
Check that the battery is charged.
Make sure that you hold the power button for
min. 3 seconds to switch on the device.
The device will switch on with 28 seconds delay.
