the inverter is bundled with dry contact, please follow below diagram 2 for wiring connection.
Use a RJ45 to RS232 cable bundled with inverter to connect communication port to PC. If the inverter is not
bundled with dry contact, it’s necessary to use an ex5V USB adapter to provide power for remote
panel.
Step 5:
Connect remote panel to inverter with a 6-m RJ45 communication cable and a 6-m RJ11 cable (only
available for the inverter with dry contact, connect NC and NO port of dry contact) as below diagrams.
Diagram 1: Wiring diagram for inverter without dry contact
Diagram 2: Wiring diagram for inverter with dry contact
Operation
After main switch(
) and external power input switch(
,only available for inverter without dry contact) are
powered on, users can monitor and control the inverter from a distance with the remote panel. Besides, users
also can monitor and control
the inverter with PC software via communication port.
The AC output of the inverter can be powered on/off by remote panel. For the interface operation, please refer
to the inverter manual.
