MPP Solar HYBRID LV 6048, Руководство пользователя

Страница: 22 / 49

20
All of Inverters:
When “ALL” is selected, parallel or
3-phase system will continue
working according to rule of “solar
first” setting only when all of
inverters are connected to PV
modules.
For example, two units are
connected in parallel and set “SOL”
in output source priority. When
“ALL” is selected in program 30, it’s
necessary to have all inverters
connected to PV modules and PV
input is normal to allow the system
to provide power to loads from solar
and battery power. Otherwise, the
system will provide power to loads
from utility.
31
Solar power balance:
When enabled, solar input
power will be
automatically adjusted
according to the
connected load power.
Solar power balance
enable (Default):
If selected, solar input power will be
automatically adjusted according to
the following formula:
Max. input solar power = Max.
battery charging power +
Connected load power.
Solar power balance
disable:
If selected, the solar input power
will be the same as max. battery
charging power no matter how
many loads are connected. The
max. battery charging power will be
based on the setting current in
program 02.
(Max. solar power = Max. battery
charging power)
32
Bulk charging time
(C.V stage)
Automatically (Default):
If selected, inverter will judge this
charging time automatically.
5 min
The setting range is from 5 min to
900 min. Increment of each click is 5
min.
900 min
If “USE” is selected in program 05, this program can be set up.
33 Battery equalization
Battery equalization Battery equalization disable (default)
If “Flooded” or “User-Defined” is selected in program 05, this
program can be set up.
34
Battery equalization
voltage
Default setting: 58.4V. Setting range is from 48V ~ 58.4V.
Increment of each click is 0.1V.
35 Battery equalized time
60min (default) Setting range is from 5min to 900min.
Increment of each click is 5min.