MPM MWP-20, Руководство пользователя

Страница: 27 / 60

27
EN
4.
The angle of airflow can be changed by loosening the nut (8). When the angle of the fan head
is correctly set, screw the nut (8) back on.
Changing the blowing angle Fan oscillation on/off
5.
The fan oscillation can be switched on/off using the button on the motor casing by pressing
it in or pulling it slightly upwards.
6.
The humidifier function is activated by pressing the “MIST” button (10e). Operation of the
humidifier will be signalled by the status lamp (18b) lighting up green. Water mist will be
visible in the mist atomiser (15).
7.
With the knob (18a) you can adjust the intensity of the water mist ejection
8.
The lack of water will be signalled by the status lamp (18b) which will turn red. The device
must then be switched off, disconnected from the mains supply and the water in the tank
(17) must be refilled.
9.
The fan and humidifier functions are independent of each other, i.e. you can set the opera-
tion of only the fan or only the humidifier or both functions at the same time.
10.
The timer knob allows you to set the operating time after which the unit will automatically
switch off. Time available ranges between 0-60 minutes. The “ON” position starts the device
without a time limit.
11.
The device is switched off by pressing the “0” button (10a) and turning the clock knob to the
“OFF” position
CLEANING AND MAINTENANCE
CAUTION! Unplug the appliance from the mains before cleaning and maintenance.
CAUTION! Do not submerge the appliance in water or other liquids!
1.
Clean the casing and propeller with a damp cloth and then wipe it dry. Use a bit of a gentle
detergent to remove persistent grime. The propeller can be accessed by removing the front
casing.
2.
You can gently dust the mesh casing of the propeller with a soft brush. For a better cleaning
effect, you can remove the casings before cleaning.
3.
Clean the internal water container located where the main water tank is mounted (upper
part of the humidifier casing “18”) of any remaining water by tilting it over a vessel. Then
clean the inside with a damp cloth. Pay special attention to the cleanliness of the float and