MPM MWP-20, Руководство пользователя

Страница: 26 / 60

26
EN
FILLING THE WATER TANK
CAUTION! Always switch off the device and disconnect it from mains before filling the water tank.
CAUTION! When filling the water tank and in the course of regular operation the fan should be placed on a hard,
dry, smooth, horizontal and stable surface.
1.
Remove the water tank from the machine using the handle on the tank
2.
Turn the container 180° and unscrew the water filler cap
3.
Pour cool, clean water, preferably distilled and filtered, into the tank. Be careful not to overfill
the tank.
4.
Fit and screw on the water stopper.
5.
Turn the water tank 180° again and place it on the humidifier casing (19).
CAUTION!!!
- the water being poured in must not be hotter than 40°C
- do not add any chemicals or odours to the water
- do not pour water directly into the humidifier (19) – the valve in the water cap will automatically dispense the
desired amount of water into the humidifier
Filling the water tank
DEVICE OPERATION
CAUTION! The device can be switched on only after its complete assembly. Activation of a partially assembled
device does not ensure safe and proper operation.
1.
Place the unit on hard, dry, level, horizontal and stable surface. If you will be using the humid-
ification function then fill the water tank with water.
2.
Connect the device to the mains supply and set the time clock knob (10f) to the “ON” posi-
tion.
3.
Use the buttons (10 b,c,d) to set the desired airflow speed:
- “1” – low speed
- “2” – medium speed
- “3” – high speed