MPM MPR-02, Руководство пользователя

Страница: 13 / 32

1
GB
10. After the operation is over hang the unit using the hanger (11).
HAIR CURLER
1. Plug the unit, a green control light indicating the unit is plugged shall light (9).
2. Use the ON (1) button to switch the unit on. After switching on the unit starts heating up to the
maximal temperature 200'C. Heating up process is signalized by blinking LED diodes on the
display (4). Select a required temperature due to temperature regulation buttons (5).
3. At the moment the unit reaches a required temperature the LED diodes shine yellow.
4. Press the button launching the curler’s function (8).
5. Take some hair, no wider than 5 cm.
6. Press the button releasing the clamping element (6) and put hair between ceramic plates (2) and
the clamping element (3). The final effect is durable provided that the hair is heated heavily.
7. The unit is equipped with a rotary cable (10) which simplifies using it.
8. After use of the unit is over, switch the unit off using the OFF button (1). Unplug the unit and wait
until it cools down.
9. After cooling down wipe the unit out using a wet cloth. Do not use chemical agents.
10. After the operation is over hang the unit using the hanger (11).
USER MAINTENANCE INSTRUCTION
1. The unit does not require special maintenance activities. User must conform to the use rules.
2. Always unplug the unit after the use is over and before brushing hair out.
3. The casing of unit may be cleaned with a wet cloth. Never put the unit, cable or plug into water
or other liquids!
4. After the operation is completed wait until the unit cools down.
5. Do not wind the cable on the unit!
TECHNICAL DATA
Voltage: 220-240V
Frequency: 50/60 Hz
Power: 45W