13
EN
The cooking plates
❺ ❻ ❼
can be disassembled by moving the sliders
❽
located on the in-
side of the top and bottom cover. To install the cooking plates, place them in the fixing open-
ings, where the top and bottom plates touch, and then gently press to the respective covers.
USE OF THE SANDWICH/WAFFLE MAKER/GRILL
NOTE! When opening the cover, proceed carefully owing to hot damp from the area under the heating panels!
Depends on the product you want to prepare, place the sandwich/waffle/grilling plates in the
appliance.
1.
Oil the heating plates with butter, margarine or other fat. Close the cover of the appliance
❸
.
2.
Insert the plug into the socket – red caution lamp (power supply)
❶
and green caution lamp
(thermostat)
❷
will go on. Close the cover of the appliance
❸
.
3.
Prepare the sandwiches, dough for waffles or products for grilling.
4.
When the green indicator lamp
❷
will go off, open the cover by pulling the latch
❹
and put
the products on the heating plates. Gently close the cover and clamp with clip
❹
.
5.
When checking the condition of products in course of their roasting, open the cover carefully
owing to hot damp escaping from the both sides of the appliance! Adjust the temperature
with the thermostat knob according to the desired effect.
6.
Open the cover and remove sandwiches/waffles/grilled products using wooden or plastic
spatula.
7.
Before preparation of the next products, always close the cover in order to maintain required
temperature. The green caution lamp (thermostat) will go on and off in course of roasting
to indicate that required temperature is maintained.
8.
When done grilling, unplug the grill from the mains, and leave the grill to cool down com-
pletely.
NOTE! Do not use and metal and sharp knifes or forks, otherwise the damages of heating surfaces are possible!
CLEANING AND MAINTENANCE
1.
Prior to commencing the cleaning (and after finishing the roasting), pull out the plug from
the plug socket and allow the appliance to cool completely.
2.
Thoroughly wash the heating panels, clean the roaster edges using soft cloth or towel. For
ease of cleaning, the heating plates may be disassembled.
3.
If complete removal of any food residuals from the surface of heating panels is problematic,
pour some edible onto dirty surface and try to clean after about 5 minutes. Your efforts will
be successful this time.
4.
Wipe the external surface of the roaster using wet cloth.
ATTENTION! Do not immerse the appliance in water or any other liquids! Do not wipe the inside of the appliance
with acute, abrasive cloths or sponges, as this can damage the heating surfaces!
Содержание MOP-43M
