MPM MOD-38, Руководство пользователя

Страница: 17 / 40

17
EN
USING THE VACUUM CLEANER
1.
Make sure the vacuum cleaner is properly assembled and the battery is charged.
2.
Start the vacuum cleaner with the button (6)
directly on the vacuum cleaner or with the
button (1) on the main handle (fig.8). The op-
eration of the buttons is independent of each
other as long as the vacuum cleaner is in the
main handle.
3.
Pressing the power button again makes the
vacuum cleaner work with high suction pow-
er. Another press of the power button switches
off the vacuum cleaner.
4.
The electric brush (15) with LEDs (16) illuminat-
ing the vacuumed surface is activated togeth-
er with the vacuum cleaner. The multifunc-
tional electric brush is suitable for vacuuming
all types of hard surfaces and carpets.
5.
The use of additional vacuum cleaner accesso-
ries (small brush, crevice brush) is possible after removing the vacuum cleaner from the main
handle. Press the button (4) and remove the vacuum cleaner from the main holder (2) and
then connect a suitable accessory to the end of the vacuum cleaner (fig.9).
Fig. 8
Fig. 9
Fig. 10
6.
Keep the dust container (12) level under reg-
ular control. An overfilled container reduces
vacuuming efficiency, increases energy con-
sumption and causes the filters to become
dirty more quickly. To empty the dust contain-
er, switch off the vacuum cleaner by removing
it from the main handle with the button (8),
free the dust container (12) from the vacuum
cleaner, pull out the HEPA filter (10) and the
filter body (11) from the container. Empty the
contents of the container into the waste bin
(fig.10).
7.
Once the container is empty, fit the filter body and HEPA filter into the container and fit the
container into the vacuum cleaner – continue vacuuming.
CAUTION! Do not allow the dust container to be overfilled! The dust level in the container must not exceed the
“MAX” level.
CAUTION! If the vacuum cleaner’s suction power has noticeably decreased, the nozzle is clogged and/or the dust
container is full. Clear the suction nozzle and/or empty the dust container.
8.
When you have finished vacuuming, switch off the vacuum cleaner, clean the dust container
and recharge the battery. A fully charged battery is able to provide up to 45 minutes of vac-
uuming at low suction power. Discharging of the battery is indicated by the pulsating of the
status light (7) and a significant drop in suction power.
CLEANING AND MAINTENANCE
CAUTION! Do not submerge the vacuum cleaner, charger and docking station in water!
CAUTION! To achieve the best possible performance, clean the filters and the dust container after each use.
CAUTION! Maintenance work must be carried out with the vacuum cleaner switched off and the charging cable
disconnected!
1.
Clean the outer surfaces of the vacuum cleaner with a damp cloth and then wipe it dry. Use a
mild cleaning agent for stubborn dirt.
2.
Empty the dust container and remove the filter body (11) and HEPA filter (10) from the con-
tainer. Clean it with a soft bristle brush and wipe it off with a damp cloth. Be careful not to
damage the delicate structure of the HEPA filter and the mesh on the filter body. Clean the
inside of the dust container with a damp cloth.
CAUTION! Do not immerse the dust container, HEPA filter and filter body in water.
3.
Charge the battery after each use of the vacuum cleaner. Do not store the vacuum clean-
er with a discharged battery. Only charge the battery with the supplied charger. Do not
short-circuit the battery. Replace only with the same type.
CAUTION! Do not dispose of the used battery in the waste bin. Only discard it in proper pick-up points or at the
store. Do not dispose of the battery in fire!