MPM MOD-12, Руководство пользователя

Страница: 13 / 28

13
GB
filter insert is dry before putting it back into place. Before closing the lid (12) make sure that
the HEPA filter insert is properly positioned. Clean the insert once a month (depending on
frequency of use). If the filter is too dirty or damaged, replace it with a new one. Do not wash
the HEPA filter.
2.
In order to clean the motor filter, open the upper lid of the vacuum cleaner by pressing
the
u button, take out the bag and carefully pull out the filter frame upwards. Remove the
filter from the frame, wash it under running water with detergent and dry thoroughly.
CLEANING AND MAINTENANCE
1.
Once in a while, wipe the external surface of the vacuum cleaner with a wet cloth. It helps to
keep the appliance in good condition.
2.
Do not clean the appliance using strong cleaning agents (solvents) or acute materials, which
can cause permanent damage to the housing.
3.
Clean filters and dust bag as indicated above.
TROUBLESHOOTING
Types of failure: Possible causes: Guidelines:
front lid is not closed no dust bag or incorrectly placed place the dust bag correctly
vacuum cleaner housing overheat
slight overheating of the vacuum cleaner housing is natural, but in case of strong
overheat immediately turn off the appliance and contact service centre
low suction power
heavily contaminated filters clean or replace filters
dust bag is full replace dust bag or empty textile dust bag
clogged hose or telescopic wand remove any items blocking hose or wand