MPM MBL-26, Руководство пользователя, Страница: 19 / 40

19
GB
4.
Hard products, including coffee beans, soy beans, chocolate and ice will wear out the
blade rotor faster. It is natural for the blade rotor to become dull and require replace-
ment during the operating life of the blender.
5.
The vacuum generated in the blender jug / portable pitcher will be slowly lost due to
the atmospheric pressure.
6.
Crush ice cubes by operating PULSE repeatedly, or use the CRUSH program. Add a lit-
tle water to the blender jug to crush ice cubes easier.
7.
If the blender jug is improperly installed (locked) or with the blender jug lid ❷ not
closed, Error E1 will be displayed with 3 beeps if you attempt to start blending.
8.
Cut large portions of products into smaller ones before placing them in the blender jug
and blending.
9.
The blender is not designed for the following:

grating potatoes
 beating eggs or dairy substitutes

mincing raw meat
 beating or mixing thick dough (as these products tend to form heavy lumps that can
damage the blender)
CLEANING AND MAINTENANCE
CAUTION! Before cleaning, always unplug the high-speed vacuum blender from the mains outlet and wait until
it has completely cooled down.
CAUTION! Do not immerse the blender housing or the swivel blender top in water or other liquids.
CAUTION! The blades are very sharp. Handle with care to avoid injury.
1.
Clean the blender housing and the swivel blender top with a soft, damp cloth; next, wipe
them dry.
2.
Wash other parts of the high-speed vacuum blender with warm water and a detergent. Next,
rinse clean and leave to dry.
3.
The blender jug and the portable pitcher are dishwasher safe.
4.
Always clean the rubber gaskets and valves carefully. They need to be perfectly clean before
use to achieve a correct vacuum level.
5.
Periodically inspect all parts of the high-speed vacuum blender for wear and tear before
assembly. If the blender blade rotor stalls or does not rotate smoothly, do not use the high-
speed vacuum blender. Make sure that blender blade rotor runs smoothly by rotating it
clockwise. Do this carefully, as you may cut yourself. The blade rotor should rotate freely.
6.
If the blender jug is damaged, leaks, or shows cracks, chipping or scratches, do not use the
high-speed vacuum blender. Otherwise the blender jug will burst during blending.
7.
The motor of the high-speed vacuum blender is maintenance-free. Never use abrasive or
corrosive cleaning agents, scrubbing utensils or steel wool (pot scourers) to clean the high-
speed vacuum blender; otherwise the high-speed vacuum blender will be damaged.
8.
You can use the CLEAN program to help remove persistent dirt from the blender jug and the
blade rotor with water. The program generates a very strong water vortex in the blender jug
to facilitate cleaning. Cleaning with the CLEAN program:
 Assemble the blender jug and pour about 300 ml of lukewarm water inside.

Place the blender jug in the blender housing.