MPM 1171885, Руководство пользователя

Страница: 10 / 24

10
GB
If you are unsure what fabric type the product to be ironed is, find the correct temperature
setting by ironing the part of the product that will be concealed when in use/worn. Start from
the lowest temperature setting and increase it gradually. Silk, cotton and synthetics: to pre­
vent glossy spots from heat, iron these materials inside out.
CAUTION! Always start ironing with the products that require the lowest temperature setting.
2.
Plug the power cord (9) to a PE (three­bolt/protective earth) mains outlet and wait for ap­
proximately 2 minutes.
3.
The iron will heat up to the set temperature. If you need to change the temperature setting,
always remember to wait until the iron is colder/hotter.
TEMP KNOB POSITION THERMOSTAT ADJUSTMENT TEXTILE TYPE
•
Low temperature Synthetic fibres
• •
Moderate temperature Silk / wool
• • •
High temperature Cotton / linen
STEAM BLAST
The steam blast of the soleplate helps iron out the most persistent creases.
Use the steam blast only at the highest temperature setting (•••).
1.
Check that the water tank is filled.
2.
Press the steam blast button (1) as required when ironing.
IRONING FINISH
1.
Unplug the power cord from the mains outlet.
2.
Put away the iron standing up in a safe place and wait for it to cool down.
3.
Empty the water tank.
CLEANING AND MAINTENANCE
1.
Make sure that the iron has been unplugged and cooled down.
2.
Wipe off trace scale and other dirt from the soleplate with a damp cloth and a (liquid)
non­abrasive detergent.
CAUTION! Keep the iron away from metal objects to protect the sole from scratching. Never clean the iron sole
with abrasive pads (incl. hard sponges), vinegar or other chemicals.
3.
Wipe the iron top body with a damp cloth.
4.
Frequently flush the water tank and empty it afterwards.
STORAGE
1.
Unplug the power cord from the mains and wait for the iron to cool down.
2.
Empty the water tank.
3.
Stow the empty iron standing up on a solid, firm surface.