Integrated SpeedView Traffic Data Computer – Operator’s Manual
Page 1
Section 1 – Set-up Information
Setting the Time and Date on Your New Sign
To adjust the time and date on your new sign, follow these steps:
1.
Press the bottom black button on the rear side of the sign until the CLOCK LED illuminates at which time the
current date and time setting should scroll across the display.
2.
While the CLOCK LED is illuminated, press the red SELECT button to enter into the Edit mode. You should
see the CLOCK LED begin to blink and the two digit year appear in the display.
3.
You can adjust the two digit year value up and down using the black up and down buttons.
4.
When the year value is correct, press the red SELECT button to save it and move on to the month setting.
5.
You can adjust the two digit month value up and down using the black up and down buttons.
6.
When the month value is correct, press the red SELECT button to save it and move on to the date setting.
7.
You can adjust the two digit date value up and down using the black up and down buttons.
8.
When the date value is correct, press the red SELECT button to save it and move on to the hour setting.
9.
You can adjust the two digit hour value up and down using the black up and down buttons.
10.
When the hour value is correct, press the red SELECT button to save it and move on to the minute setting.
11.
You can adjust the two digit minute value up and down using the black up and down buttons.
When the minute value is correct, press the red SELECT button to save it and exit the Edit mode.
