ASSEMBLY TIP: Place the window unit over the locating
posts in the body and press lightly until it is fully seated.
Now, hook the rear locating holes of the interior over the
rear posts in the body, then CAREFULLY bend the front
posts back SLIGHTLY until they fit through the front holes
of the interior. With all four posts through the holes, press
the interior into place.
ASSEMBLY TIP: Work the mounting pegs as far as
possible into locating holes of chassis. Slide holes
in rear of body over pegs at rear of chassis. Carefully
spread body to fit over chassis and align pegs into
mounting posts of body. Carefully press body and
frame together until body is fully seated onto frame.
To notches in interior floor
NOTE: Chassis shown upside down for clarity.
CLEAR
NOTE: Long Hubs are used
on Front Wheels.
To holes in rear of body
1
46
18
17
20
19
43
43
46
