Remote Start 6-Pin Harness:
•
Red (2) - connect to Co12v The wire color and location information is on your vehicle
wiring chart – NOT in the ADS-DL manual. When tested, this wire will show +12 volts whether
the vehicle’s ignition is on or off.
•
Pink – connect to Pin 1 at the vehicle’s Main Ignition Harness Connector. When tested, this
wire will show +12 volts only with the key in the ON position
•
Grey – connect to Pin 3 at the vehicle’s Main Ignition Harness Connector. When tested, this
wire will show +12 volts only with the key in the ON position
Remote Start 12-Pin Harness
•
Black to Ground
•
Purple – connect to vehicle Brake Switch wire. When tested, this wire will show +12 volts only
when the brake pedal is being pressed. Wire color and location information is on your vehicle
wiring chart.
Bypass 3-Pin Connector w/Yellow wires
•
Yellow wire - connect to Pin 5 at the Main Ignition Harness Connector. There is no test for this
wire.
Bypass 7-Pin Connector (white plug)
•
Orange – connect to Pin #1 on ODB2 Connector (under driver’s dash). There is no test for this
wire.
•
Pink – connect to remote start’s pink wire in 6-pin connector
•
Orange/Black to ground
Bypass 9-Pin Connector (black plug)
•
Black/white - connect to remote start’s grey wire in 6-pin connector
Need tips on how to make the wiring connections? See Installer’s Tip #2 on page
6
