11
Functions Description of the Gimbal
Control the camera or phone to record a video or take a photo
a)
Install the camera on the gimbal, then you can use the shutter control cable to
connect the gimbal and camera. Press the center button once to take a photo in
photo mode. Press the center button once to start/stop recording in video mode.
b)
Install the phone on the gimbal, then turn on the MOZA Genie App and connect the
gimbal to the MOZA Genie App. Press the center button once to take a photo in
photo mode. Press the center button once to start/stop recording in video mode.
c)
Double press the top button to switch the video mode/photo mode
Mimic Motion Control
(requires 2 smartphones: one on gimbal and one to control the mimic. If planning to use
the camera on gimbal, only one smartphone is required)
a)
Place the smartphone on the Gimbal through the phone holder;
b)
U
se a 2nd smartphone and open the “MOZA Master” App, connect it to the gimbal
and enter Mimic Motion Control Mode;
c)
Rotate the 2nd phone and it will control the movement of the gimbal.
Timelapse
Use the MOZA Master App or MOZA Genie App to connect the gimbal, select
“Creative
video
”
button and there will be multiple timelapse modes for shooting
Bidirectional Start
By default, we mount the camera handle near the tilt motor so that the camera control
port can be exposed. But in some special cases, we need to mount the camera control
port near the tilt motor for normal use.
The following situations will require reverse mounting:
a)
The camera is too wide for forward mounting.
b)
The lens used is too heavy to be balanced when forward mounting.
Reverse mounting steps:
a)
Place the shorter side of the
L-Bracket next to the lens
and mount it on the bottom
of the camera.
b)
Rotate the roll axis
180°around the roll motor, then the tilt motor will be on the left of the roll motor.
c)
Mount the shorter side of the L-Bracket to the quick release baseplate.