Moza CRP, Руководство пользователя

Страница: 2 / 4

2 3
Product Description
CRP Pedal Installation
· CNC Aluminum Alloy.
· 100KG/220lbs load cell sensor.
· Three-stage clutch (for 3 pedals model)
· Organ type accelerator.
· Adjustable resistance, angle, and Travel.
· Tunning by Experienced Drivers.
3.
Insert the interface of the throttle line into the throttle interface found in the control module at the
bottom of the brake. Connect the clutch line to the clutch interface in the control module, connect the
elbow type-B end of the USB line to the USB interface in the control module, and connect the other end
to the PC.
4.
The Working status of CRP Pedal can be viewed in the MOZA Pit House. (if the device is still gray or
there is no response after stepping on it, please unplug the USB interface at the PC end, close the pit
house, re-connect the USB interface, and reopen the MOZA Pit House)
5.
The start, end and travel of the pedal can be set in MOZA Pit House.
Pedal Spacing Adjustment
1.
Install the pedals to the bottom plate and adjust the position. Install the screws and washers for
each pedal. In order to ensure the stability of use, it is recommended to install all 6 screws for each
pedal.
2.
Mount the bracket horizontally, align both ends, and then tighten, and secure it to the base with the
M4 screws.
Adjust the pedal forward or backwards. Use the included screws to secure the pedal once the correct
position has been found.