WAPN008-1 User
’s Manual
Getting Started
Information for the OEMs and Integrators
Any party of the installer who likes to use the module of 4.9GHz band shall fulfill licensing requirement (§90.1207).
The installation to Aeronautical mobile operations are prohibited (§90.1205).
The end product with an embedded WAPN008-1 module may also need to pass the FCC Part 15 unintentional
emission testing requirements and be properly authorized per FCC Part 15.
The following statement must be included with all versions of this document supplied to an
OEM or integrator, but should not be distributed to the end user.
1) This device is intended for OEM integrators only.
2) Please see the full Grant of Equipment document for other restrictions.
This radio transmitter FCCID: SLE-WAPN008-1 has been approved by FCC to operate with the antenna types listed
below with the maximum permissible gain and required antenna impedance for each antenna type indicated.
Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are
strictly prohibited for use with this device.
Maximum Permissible Exposure (MPE): Ensure that at least 50 cm separation distance is maintained between
the wireless module and the body of the user, when Panel antennas, ANT-WSB5-PNF-18 or ANT-WDB-PNF-1518,
are used.
Antenna List
No.
Manufacturer
Part No.
Antenna Type
Peak Gain
1
MOXA
ANT-WDB-ANM-0306
Dipole
3.8dBi For 2.4 GHz
6.3dBi For 4.9 GHz
6.3dBi For 5 GHz
2
MOXA
ANT-WDB-ARM-0202
Dipole
1.8dBi For 2.4GHz
1.8dBi For 4.9 GHz
1.8dBi For 5 GHz
3
MOXA
ANT-WDB-ARM-02
Dipole
2.04dBi For 2.4GHz
0.81dBi For 4.9 GHz
0.81dBi For 5 GHz
4
MOXA
ANT-WDB-ANM-0502
Dipole
4.62dBi For 2.4GHz
2dBi For 4.9 GHz
2dBi For 5GHz
5
MOXA
ANT-WSB5-ANF-12
Dipole
12dBi For 5 GHz
6
MOXA
ANT-WSB5-PNF-18
Panel
18dBi For 5 GHz
7
MOXA
ANT-WDB-PNF-1518
Panel
15dBi For 2.4GHz
18dBi For 5GHz
8
Huber+Suhner
1356.17.0042
Railway
13dBi For 5GHz
9
Huber+Suhner
1356.17.0077
Dipole
14dBi For 5GHz
