Moxa VPort 26A-1MP
System Configuration
4-43
NOTE
Video Motion Detection is provided as a reference because it is environment-dependent. When the settings are
configured to be very sensitive to motion, some triggered events might actually be false alarms that were
triggered by only a small difference between sequential images. These false alarms might be triggered by the
flicker of fluorescent lights, the movement of shadows, or similar everyday events.
CGI Event
The VPort can accept 5 CGI commands, which are sent from external devices, such as ioLogik series Ethernet
I/O, to be the event alarms.
NOTE
The VPort only can accept the CGI commands that follow the VPort’s CGI commands format.
CGI Event Trigger Actions
Setting
Description
Default
Enable CGI Event alarm Enable or disable CGI Event alarm.
Disable
Event
Select the Event 1, 2, 3, 4, 5
Disable
Trigger Relay1 alarm
Once this CGI Event is triggered, the Relay alarm will be
activated
Disabled
Send snapshot image
via FTP
Once this CGI Event is triggered, the VPort will send the
snapshot images set in the Event Alarm/Basic page to the
FTP server, which are set in the Network/FTP Server page.
Disable
Send message via HTTP
Event Servers
Once this CGI Event is triggered, the VPort will send the
message set in the HTTP Action Setting to the HTTP event
servers, which are set in the Network/HTTP Event Server
page.
Disable
Save snapshot to
storage
The pre-alarm, trigger, and post-alarm snapshot images can be
saved on an (optional) SD card.
Disabled
Record video on SD
card for Sec
Once this VMD is triggered, then for a configured time period
the VPort will record video to an (optional) SD card.
Disabled
