Moxa VPort 26A-1MP
System Configuration
4-39
Digital Input
Setting
Description
Default
Enable digital input
alarm
Enable or disable the digital input alarm.
Disable
Trigger Conditions
Setting
Description
Default
High
The DI is always in the “High” state after an alarm is detected. Disable
Low
The DI is always in the “Low” state after an alarm is detected. Enable
Rising
The DI works from state “Low” to state “High” and then back to
state “Low” when an alarm is detected.
Disable
Falling
The DI works from state “High” to state “Low” and then back to
state “High” when an alarm is detected.
Disable
NOTE
Please refer to Chapter 1 to see the DI specifications.
Trigger Actions
Setting
Description
Default
Trigger Relay1 alarm
Once this DI is triggered, the Relay1 alarm will be activated Disable
Send snapshot image
via E-mail
Once this DI is triggered, the VPort will send the snapshot
images set in the Event Alarm/Basic page to the E-mail
addresses, which are set in the Network/ SMTP Server page.
Disable
Send snapshot image
via FTP
Once this DI is triggered, the VPort will send the snapshot
images set in the Event Alarm/Basic page to the FTP server,
which are set in the Network/ FTP Server page.
Disable
Send message via HTTP
Event Servers
Once this DI is triggered, the VPort will send the message set in
HTTP Action Setting to the HTTP event servers, which are set
in the Network/ HTTP Event Server page.
Disable
Record video on SD
card for Sec
Once this DI is triggered, then for a configured time period
VPort will record video to an (optional) SD card.
Disabled
HTTP Action Setting
Setting
Description
Default
Server 1, 2, 3, 4
Select the HTTP event server for sending the HTTP action
Disable
Blank column
Administrators can customize the message sent to the HTTP
event sever in this column
Blank
