UC-8580 Series Hardware User Manual
10
ATTENTION
Safety First!
Be sure to disconnect the power cord before installing and/or wiring your UC-8580 computer.
Wiring Caution!
Calculate the maximum possible current in each power wire and common wire. Observe all electrical codes
dictating the maximum current allowable for each wire size. If the current goes above the maximum
ratings, the wiring could overheat, causing serious damage to your equipment.
Temperature Caution!
Be careful when handling the unit. When the unit is plugged in, the internal components generate heat,
and consequently the outer casing may feel hot to the touch.
Connecting the Power
Connect the 24 to 110 VDC power line with M12 A-coded connector to the UC-8580 Series computer. If the
power is supplied properly, the P LED will glow a solid green after a 25 to 30-second delay. The power input
location and pin definition are shown in the following figures:
