Moxa Technologies NPort, Руководство пользователя

Страница: 103 / 122

Printer Server Installation 7-3
Adding the Printer
Now you have the TCP/IP printing services, you have to add the TCP/IP port to
your computer and install the driver of the printer connecting to the TCP/IP printer
port.
1. Run Add Printer wizard from Start -> Settings -> Printers -> Add Printer.
2. Select 'My Computer' answering to 'This Printer will be managed by' then click
next.
3. Select "Add Port". Click Next to continue.
4. Select "LPR Port". Click Next to continue.
5. At the field for the 'Name or Address of server providing lpd', enter the NPort
Server IP address.
6. Ignore the field for the 'Name of printer or print queue on that server'. Click OK
to continue.
7. Wizard pops up a warning message because of no print queue being set. Click
OK to confirm.
8. Select logical printer port you just add as LPR port. It should be the IP address
you add.
9. Click OK to select your printer driver as usual.
10. Select the printer as default printer if needed.
11. Select Sharing when prompted with questions asking the printer to be shared or
not. And, enter the shared printer name.
12. Follow the instruction on the screen to finish.
Printing through NPort Server
To print from any Windows application program, simply select the printer you
configured from the previous section and print the file as usual.
If to print from command line, enter the following:
Lpr –s NT_host –P printer_name file_name
NT_host: the name of the NT host where the remote printer is configured.
Printer_name: the name assigned to the remote printer
File_name: the file you need to print