- 2 -
Overview
The Moxa NPort S8000 series fully integrates an industrial serial device
server and redundant managed Ethernet switch into a single device,
making it easy to enable your serial devices to operate over a network
and connect Ethernet-enabled devices in industrial field applications.
Package Checklist
Before installing the NPort S8000, verify that the package contains the
following items:
•
1 NPort S8000 combo switch / serial device server
•
CBL-RJ45F9-150 cable
•
Documentation and software CD
•
Quick installation guide
•
Warranty card
Optional Accessories (must be ordered separately)
•
Wall-mounting kit
Please notify your sales representative if any of the above items are
missing or damaged.
Hardware Introduction
The NPort S8455I
integrates 5 Ethernet ports and 4 male DB9 ports
for the RS-232/422/485 serial port.
NPort S8455I-SS-SC/NPort S8455I-MM-SC
integrates 2 fiber ports,
3 Ethernet ports, and 4 male DB9 ports for the RS-232/422/485 serial
port.
The NPort S8458
integrates 4 fiber ports, 4 Ethernet ports, and 4
male DB9 ports for the RS-232/422/485 serial port.
Reset Button
—Hold the Reset button for 5 seconds to load factory
default settings: Use a pointed object, such as a straightened paper clip
or toothpick, to press the reset button. This will cause the Ready LED to
blink on and off. The factory defaults will be loaded once the Ready LED
stops blinking (after about 5 seconds). At this point, you should release
the reset button.
