Wall Mount
For many industrial applications, you will find it convenient to mount NPort
4511 on the wall, using two screws, as indicated below.
STEP 1:
Screw two screws, separated by 7.8 cm, into the wall. The heads of the screws
should be no greater than 6.5 mm in diameter, and the shafts should be no
greater than 3 mm in diameter. Do not screw the screws in all the way—leave a
space of about 2 mm to allow room for sliding the NPort 4511 unit’s ears
between the wall and the screws.
STEP 2:
Insert the two screw heads through the
large parts of the keyhole shaped
apertures, and then slide NPort 4511
downwards, as indicated.
STEP 3:
For added stability, simply tighten
the two screws.
To remove NPort 4511 from the wall mount, simply reverse Steps 2 and 3.
1-8
