NE-4100 Series User’s Manual
Web Console Configuration
6-7
SNMP Settings
Community name
Setting
Factory Default
Necessity
1 to 39 characters
(E.g., Support, 886-89191230 #300)
public Optional
A community name is a plain-text password mechanism that is used to weakly authenticate queries
to agents of managed network devices.
Contact
Setting
Factory Default
Necessity
1 to 39 characters
(E.g., Support, 886-89191230 #300)
None Optional
The SNMP contact information usually includes an emergency contact name and telephone or
pager number.
Location
Setting
Factory Default
Necessity
1 to 39 characters (E.g., Floor 1, office 2)
None
Optional
Enter a location string for SNMP agents. This string is usually set to the street address where the
module is physically located.
IP Address report
When the module is used in a dynamic IP environment, additional time must be spent on IP
management tasks. For example, when a module is operating as a server (TCP or UDP modes), a
PC operating as a client will need to know the module’s IP address. If the DHCP server assigns a
new IP address to the module, the PC must have some way of obtaining the module’s new IP
address. The
IP Address report
fields are used to set up periodic reporting of the module’s IP
address when the module’s IP address is assigned by a server. The IP address report is sent
automatically at regular intervals to an IP address and TCP port number of your choice. There are
two ways view the module’s IP address report on a PC:
y
Install Network Enabler Administrator and use the built-in IP Address Report function.
y
Develop software that parses the IP address report data. Please refer to Appendix C for details
on how to parse the module’s IP address report data.
Auto report to IP
Setting
Factory Default
Necessity
E.g., 192.168.1.1 or URL
(IP addresses of the form x.x.x.0 and
x.x.x.255 are invalid.)
None Optional
If left blank, auto IP reporting is disabled. If an IP address is entered along with a TCP port
number, the IP address reports will be sent to the specified address and port number.
Auto report to TCP port
Setting
Factory Default
Necessity
E.g., 4001
4002
Optional
If left blank, auto IP reporting is disabled. If a TCP port number is entered along with an IP
address, the IP address reports will be sent to the specified address and port number.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-9766-Moxa-NE-4120A.aspx
