- 7 -
Specifications
Power Requirements
Power Input
12 to 48 VDC
Power Consumption
416mA@12VDC, 195mA@24VDC,
110mA@48VDC
Operating Temperature
Standard model:
0 to 60°C (32 to 140°F)
Wide temperature model:
-40 to 75°C (-40 to 167°F)
Ambient Relative Humidity 5 to 95% RH
Dimensions
45.8 x 105 x 134 mm (1.80 x 4.13 x 5.28 in)
Reliability
Alert Tools
Built-in buzzer and RTC
MTBF
718,131 hrs
1.
DEMKO Certificate number: 17 ATEX 1848X
IECEx Certificate number: IECEx UL 17.0019X
2.
Ambient Temperature Range:
0°C to 60°C (for models without suffix –T)
-40°C to 75°C (for models with suffix –T only)
3.
Certification String: Ex nA nC IIC T4 Gc
4.
Standards Covered: EN 60079-0:2012+A11:2013/IEC 60079-0 6th
Ed. AND EN 60079-15:2010/IEC 60079-15 4th Ed.
5.
The conditions of safe use:
a.
Ethernet Communications Devices are intended for mounting in a
tool-accessible IP54 enclosure and use in an area of not more
than pollution degree 2 as defined by IEC/EN 60664-1.
b.
Conductors suitable for use in an ambient temperature greater
than 86°C must be used for the power supply terminal.
c.
A 4 mm
2
conductor must be used when a connection to the
external grounding screw is utilized.
d.
Provisions shall be made, either in the equipment or external to
the equipment, to prevent the rated voltage from being exceeded
by the transient disturbances of more than 140% of the
peak-rated voltage.
When wiring the relay contact (R), digital input (DI), and power inputs
(P1/P2), we suggest using AWG (American Wire Gauge) 16-24 as a cable
and the corresponding pin-type cable terminals. The connector can
withstand a maximum torque of 5 pound-inches. The wire temperature
rating should be at least 105°C.
ATTENTION
For installations in hazardous locations (Class 1, Division 2):
These devices are to be installed in an enclosure with a
tool-removable cover or door, suitable for the environment.
