- 2 -
Overview
The MGate 5102-PBM-PN is an industrial Ethernet gateway for
PROFIBUS-to-PROFINET network communication.
Package Checklist
Before installing the MGate 5102-PBM-PN, verify that the package
contains the following items:
•
1 MGate 5102-PBM-PN gateway
•
RJ45 to DB9 cable (for console use)
•
Quick installation guide (printed)
•
Warranty card
Please notify your sales representative if any of the above items are
missing or damaged.
Optional Accessories(can be purchased separately):
•
CBL-F9M9-150: DB9-female-to-DB9-male serial cable, 150 cm
•
CBL-F9M9-20: DB9-female-to-DB9-male serial cable, 20 cm
•
CBL-RJ45SF9-150: RJ45-to-DB9-female shielded serial cable, 150
cm
•
ADP-RJ458P-DB9F: DB9-female-to-RJ45 connector
•
A-ADP-RJ458P-DB9F-ABC01: DB9-female-to-RJ45-connector
•
Mini DB9F-to-TB: DB9-female-to-terminal-block connector
Hardware Introduction
LED Indicators
LED
Color Function
PWR1
Green Power is on
Off Power is off
PWR2
Green Power is on
Off Power is off
Ready
Green
Steady on: Power is on, and the MGate is functioning
normally
Blinking: The MGate has been located by the MGate
Manager’s Location function
Red
Steady on: Power is on, and the MGate is booting up
Blinking: Indicates an IP conflict, or the DHCP or
BOOTP server is not responding properly
Fast blinking: microSD card failed
Off Power is off or fault condition exists
COMM
Green
Steady on: Data exchange with all slaves
Blinking: Data exchange with at least one slave
Red Bus control error
Off No data exchange
CFG
Green PROFIBUS configuration OK
Off No PROFIBUS configuration
TOK
Green Gateway holds the PROFIBUS token
Off Gateway is waiting for the PROFIBUS token
