ioLogik R1200 Series
Using ioSearch
3-9
Main Screen
I/O Configuration Tab (General)
The I/O Configuration tab shows the status of every I/O channel. This is the default tab when you first open
ioSearch.
Configuring Digital Input Channels
The ioLogik R1200’s digital channel can be separately set to “DI” or “Event Counter Mode.” In “DI” mode, the
specifications are as follows:
Type
Logic 0 (OFF)
Logic 1 (ON)
Dry contact
Open
Close to GND
Wet contact (DI to COM)
0 to3 V
10 to 30 V
