Moxa Technologies ioLogik E2210, Руководство пользователя

Страница: 131 / 144

ioLogik E2200 Series Liquid Crystal Display Module (LCM)
A-2
LCM Controls
The up and down buttons navigate between the current options. The right and left buttons enter and exit the
submenus. The center button is used when modifying settings or restarting the server.
Button Function
Up go to the previous item
Down go to the next item
Left exit the current submenu and return to the previous menu (go up one level)
Right enter the selected submenu (go down one level)
Center enter/exit editing mode
An e in the upper right hand corner of the display indicates that the parameter can be modified. Press the
center button on the LCM to modify that parameter’s settings.
LCM Options
Display Explanation / Actions
<ioLogik E2242>
This is the default “home page” showing the IP address. Press the down button to
view the submenus.
<ioLogik E2242>
server
Enter this submenu to display information about the specific server you are viewing:
• serial number
• name
• location
• e2242 f/w ver
• lcm f/w ver
• model name
<ioLogik E2242>
network
Enter this submenu to display information and settings for the network:
• ethernet link
• mac address
• ip mode
• ip address
• netmask
• gateway
• dns server-1
• dns server-2
<ioLogik E2242>
click&go
Enter this submenu to display information about the Click&Go Logic ruleset currently
loaded on the ioLogik:
• name
• status
<ioLogik E2242>
serial port
Enter this submenu to display the RS-485 cascade port settings.
<ioLogik E2242>
i/o setting
Enter this submenu to access I/O channel status. Here are examples settings that you
might see:
• DI-00 [di]=off
• DO-00 [pulse]=stop
Press up or down to navigate through the different I/O channels without needing to
return to the previous menu.
<ioLogik E2242>
console
Enter this submenu to see if the web console is enabled or disabled.