IEF-G9010 Series User Manual
19
6.
In the [DHCP Service] section, choose the DHCP Service mode:
a.
Disabled:
Disable DHCP services on the interface.
b.
DHCP Server:
Enable DHCP services on the interface. Configure the following additional settings:
i.
Start IP Address:
Enter the starting IP address of the DHCP address pool.
ii.
End IP Address:
Enter the ending IP address of the DHCP address pool.
iii.
Gateway Address:
Enter the gateway IP address that will be assigned to DHCP clients.
iv.
Lease Time:
Specify the time (in seconds) that a client device can use the assigned IP address
provided by the DHCP server.
v.
(Optional)
DNS Server 1,2:
Enter the primary and secondary DNS server that will be assigned
to DHCP clients.
c.
DHCP Relay:
Configure the interface to act as a relay to a remote DHCP server. Configure the
following additional settings:
i.
Relay Server Address:
Enter the IP address of the remote DHCP server.
7.
Click
Ok
.
Configuring the DMZ Network Interface
Steps
1.
Go to [Network] > [Network Interface].
The Network Interface tab will appear.
Содержание IEF-G9010 Series
Страница 78: ...IEF G9010 Series User Manual 78...
