DA-682C Series
BIOS Setup
3-7
Serial ATA Port
This setting displays the information about the installed drives.
SATA Port—HotPlug
This item allows you to enable/disable hot-plugging capabilities (the ability to remove the drive while the
computer is running) for installed storage drives.
Options: Disabled (default for Port 0), Enabled (default for Port 1 and Port 2)
RAID
Set HDC configuration as “Intel RST Premium” to enable
r
edundant
a
rray of
i
nexpensive
d
isks technology. The
DA-682C has three SATA interfaces, which only supports RAID levels 0, 1, and Recovery.
Recovery
utilizes RAID 1 (mirroring) functionality to copy data from a designated master drive to a designated
recovery drive. The master drive data can be copied to the recovery drive either continuously or on request.
When using the continuous update policy, changes made to the data on the master drive while the system is
not docked are automatically copied to the recovery drive when the system is re-docked. When using the on
request update policy, the master drive data can be restored to a previous state by copying the data on the
recovery drive back to the master drive.
Source:
http://en.wikipedia.org/wiki/Standard_RAID_levels
When setting the Intel RST Premium mode, or saving changes and reboot, you can select
Device
Management
to configure the following Intel Rapid Storage Technology.
