DA-682C Series
Hardware Installation
2-5
Grounding the Chassis
There is a grounding connector located on the rear panel of the computer.
Connect the connector to the chassis ground source.
ATTENTION
If protective earthing is used as a safeguard, the instructions shall require connection of the equipment
protective earthing conductor to the installation protective earthing conductor (for example, by means of a
power cord connected to a socket-outlet with earthing connection).
Power Wiring Methods
The DA-682C comes with single or dual power inputs; both AC and DC power sources are supported. Refer to
the following diagrams for detailed wiring methods.
ATTENTION
Equipment must be installed according to the applicable country’s wiring codes.
