CP-132U Series User’s Manual
2-6
Installing the CP-132UL Series Board
Step 1
: Power off the PC.
Warning!
To avoid damaging your system and board, make sure your computer is turned off
before installing any board.
Step 2:
Remove the PC’s cover.
Step 3:
Remove the slot cover bracket if there is one.
Step 4:
Plug the CP-132U Series control board firmly into a free 32-bit PCI slot or 64-bit
PCI slot.
Step 5:
Fasten the holding screw to fix the control board in place.
Step 6:
Replace the system cover.
Step 7:
Power on the PC. The BIOS will automatically set the IRQ and I/O address.
Note!
Moxa Universal PCI or PCI boards will occupy one unique IRQ and I/O address,
which are assigned automatically by the PCI BIOS.
Step 8:
Proceed with the software installation discussed in the next chapter, “Software
Installation.”
Содержание CP-132U Series
Страница 11: ...Hardware Installation CP 132U Series User s Manual 2 3 CP 132UL I V2 120 x 64 5 mm CP 132U I V1 120 x 100 mm...
Страница 12: ...CP 132U Series User s Manual 2 4 CP 132UL V2 120 x 64 5 mm CP 132UL V1 120 x 64 5 mm...
Страница 66: ......
Страница 80: ......