Hardware Installation
CP-132U Series User’s Manual
2-5
CP-132UL Series boards have four onboard DIP Switches, referred to below as S1-1, S1-2,
S2-1, and S2-2, that allow the user to choose one of three serial interfaces—RS-422,
RS-485 (2-wire), RS-485 (4-wire)—for each of the two ports. Note that S2-1 and S2-2
select between RS-422 and RS-485, and S1-1 and S1-2 select between 2-wire and 4-wire
RS-485 (S1 is only active when S2 is set to ON).
The figures on the following page show you how to use the switches to select one of the
three serial interfaces for each of the board’s two ports.
Port 1
Port 2
DIP Switch
Settings
S1-1 S2-1
S1-2
S2-2
RS-422 — OFF
— OFF
RS-485
(2-wire)
ON ON
ON ON
RS-485
(4-wire)
OFF ON
OFF
ON
Содержание CP-132U Series
Страница 11: ...Hardware Installation CP 132U Series User s Manual 2 3 CP 132UL I V2 120 x 64 5 mm CP 132U I V1 120 x 100 mm...
Страница 12: ...CP 132U Series User s Manual 2 4 CP 132UL V2 120 x 64 5 mm CP 132UL V1 120 x 64 5 mm...
Страница 66: ......
Страница 80: ......