Software Installation
Industio CP-132 Series User’s Manual
3-19
3.
Select [Ports Configuration] tab.
4.
Click on the specific port and click [Port Setting] button to re-assign the desired
COM number for the
Industio
CP-132 Series port mapping.
Note!
Step 5 is optional, if you want to assign COM numbers to Port manually.
5.
Check Auto Enumerating COM Name check-box to assign continuous COM
numbers for subsequent ports. For example, if COM 3 is assigned to Port 1, then
COM 4 will be automatically assigned to Port 2.
Note!
Step 6 and 7 are optional, if the system doesn’t require a special
performance tuning.
6.
Re-assign the Rx FIFO Trigger by selecting a number from the pull-down list.
Check Set the change to all ports check-box if desire to apply this setting to all
ports.
Rx FIFO trigger levels, at 1, 4, 8 or 14 bytes, are available, and the default value
is 14 bytes.
7.
Re-assign the Tx FIFO Size by selecting a number from the pull-down list. Check
Set the change to all ports check-box if desire to apply this setting to all ports.
Tx FIFO sizes from 1 to 16 bytes are available, and the default value is 16 bytes.