3-8
Industio CP-132 Series User’s Manual
3.
Click on the [
Properties
] button to open the
“MOXA Smartio/Industio
Configuration Panel”
dialog box. Please see steps 8-9 in the previous section,
“Installing Driver”, for more details.
In this configuration panel, you may:
Click [
Property
] to enter “Property” dialog box to configure the selected
board with the correct “COM Number”, “Rx FIFO Trigger” and “Tx FIFO
Size”. Please see
steps 8 to 9
in the previous section, “Installing Driver”, for
more details.
Click [
Add
] to add one more board that is not yet configured in the system.
Please see
steps 6 to 9
in the previous section, “Installing Driver”, for more
details.
By unplugging CP-132 Series board, the system will automatically remove
the configuration. Therefore, there is no need to do remove action from
Moxa Smartio/Industio Configuration Panel
dialog box.
Click [
OK
] to confirm the configuration changes you made.
Click [
Cancel
] to leave the dialog with the configuration unchanged.