CA Series User’s Manual
Software Installation
3-13
2.
Under
Port Number
, select a COM number to assign to the serial port.
Select
Auto Enumerating COM Number
to map subsequent ports in numerical order. For
example, if COM 3 is assigned to Port 1, then COM 4 will be automatically assigned to Port 2.
3.
Select an
Rx FIFO Trigger.
The default value is 56 bytes (high level). Select
Set the change
to all ports
to use this setting for all serial ports on the module.
4.
Select a
Tx FIFO Size
. The default value is 64 bytes (high level). Select
Set the change to all
ports
to use this setting for all serial ports on the module.
5.
Click
OK
to approve the port settings. Click
OK
again to close the
CA Series Properties
window and apply the new port settings.
