- 12 -
ATTENTION
The AWK-1127 is
NOT
a portable mobile device and should be
located at least 20 cm away from the human body.
The AWK-1127 is
NOT
designed for the general public. To deploy
AWK-1127s and establish a wireless network safely, a
well-trained technician is required for installation.
ATTENTION
Use the antennas correctly: The 2.4 GHz antennas are needed
when the AWK-1127 operates in IEEE 802.11b/g. The 5 GHz
antennas are needed for IEEE802.11a. Make sure your antenna
installation is within a safety area, which is covered by a lightning
protection or surge arrest system.
ATTENTION
This device complies with Part 15 of the FCC rules.
Operation is subject to the following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired operation.
ATTENTION
Do not locate the antenna near overhead power lines or other
electric light or power circuits, or where it can come into contact
with such circuits. When installing the antenna. Take extreme
care not to come into contact with such circuits, because they
may cause serious injury or death. For proper installation and
grounding of the antenna. Please refer to national and local codes
(for example, U.S.: NFPA 70, National Electrical Code, Artical810,
and Canada: Canadian Electrical Code, Section 54).
NOTE
For installation flexibility, either the MAIN antenna (on the front
panel) or the AUX antenna (on the top panel) may be selected for
use. Make sure the antenna connection matches the antenna
configured in the AWK-1121/1127 interface.
To protect the connectors and RF module, all radio ports should
be terminated by either an antenna or a terminator. The use of
the resistive terminator for terminating the unused antenna port
is strongly recommended.
All manuals and user guides at all-guides.com