Movon MDAS-5, Руководство по установке

Страница: 17 / 43

- 17 -
3.4 Attach MDAS-5
Before attaching MDAS-5, clean and remove dust, finger from on the desired installation area
by technical cleaning wipe and mark the center of windshield.
It is very important to attach MDAS-5 at the center for the best performance. However, due
to interior or space, if MDAS-5 cannot be attached at the center, attach MDAS-5 as close as
to the center. You can adjust the difference in Chapter 4 Calibration.
*NOTE: MDAS-5 should not be attached more than 10 cm (4 inches) apart from the center.
For trucks/buses For passenger cars
In case of attaching to a heavy-duty truck, please rotate 180 degrees and attach it.
In this case, please press the Reverse front view button of the calibration as below.