MOVIEBIRD
®
MovieBird 24 Instruction Manual
34
MovieBird 24’
Manual Instruction
33
LCD display shows
“ERROR 08”
Encoder ADCQAF
Check encoder QAF
connection, check motor
cable, crane cable and
encoder
LCD display shows
“ERROR 09”
Encoder ADCQBF
Check encoder QBF
connection, check motor
cable, crane cable and
encoder
LCD display shows
“ERROR 10”
Encoder XINT
Check encoder
connection, check motor
cable, crane cable and
encoder
LCD display shows
“ERROR 11”
Joystick stop
Turn off and turn on
BOX. If this doesn’t help
then check joystick
cable, if it’s ok then
check internal
electronics
LCD display shows
“EROR 12”
Servo inhibit fault
Check connections
between main board
and servo, if it’s ok then
check internal
electronics on main
board and check servo
LCD display shows
“ERROR 13”
DAC Init error
Check connection
between security
voltage check, if it’s ok
then check internal DAC
module
LCD display shows
“ERROR 14”
Encoder Init error
Check connections
between encoder and
mainboard and supply of
the encoder
Box give a six or seven
beeps
Voltage error
Check all power supplies
