Movex ASEM 125, Руководство пользователя

Страница: 7 / 16

7 Manual
FUMEX ASEM 65/85/125
1 2 3 4 5 6
Manual
MOVEX ASEM 65/85/125
4.3.4 Declutching the motor
The declutching lever must be drawn into/
held in the declutching position by hand.
See Fig. 5 .
Fig. 5
Fig. 6
Fig. 8
1. Open the cover, see Fig. 6 .
2. Disconnect the motor, see Fig. 5 .
Fine adjustment of end positions is recom-
mended when the hose reel is mounted and
installed. See section
4.3.8 Adjusting the
end positions .
3. Coarse adjustment of end position for roll-out:
Rotate the drum counterclockwise as viewed from
the motor side until the roll-out wheel (3,
Fig. 7 ) is
obstructed by the stop clip (1). This is indicated by a
rattling sound.
When removing the safety clip for retraction
and roll-out, an additional 1/3 turn is allowed
before the switches stop the motor.
4. Continue unrolling the drum until the inlet is 1/3
turn before the desired end position. See
Fig. 8 for
mounting on the ceiling and Fig. 9 for mounting on
the wall/floor.
Ceiling mounting
Fig. 7
4.3.5 Installing the hose
Hose installation is only relevant when buy-
ing a hose reel without a hose.